Skip to main content

Guide

TISAX Assessment Levels: AL1, AL2 and AL3

Comparison of the three TISAX assessment levels: audit method, visibility, and typical labels. Decision matrix for AL2 vs AL3.

Benjamin Schatter
|Updated|Read time: 4 minutes

Comparison of the three TISAX assessment levels: audit method, visibility, and typical labels. Decision matrix for AL2 vs AL3.

What Are TISAX Assessment Levels?

TISAX distinguishes three Assessment Levels (AL) that determine how rigorously your organization is audited. The level depends on the protection needs of the information you process for OEMs or Tier-1 suppliers. Choosing the right Assessment Level is one of the first and most important decisions in the TISAX process, as it significantly affects effort, cost, and timeline.

An assessment level describes the assessment method, not an overall security ranking. Applicable requirements follow from the agreed objective and protection needs. An appropriate AL2 result meets a different customer requirement from a requested AL3 result.

Assessment levels · © 2026 Kopexa GmbH

AL1: Self-Assessment

At AL1, the assessor only checks that a completed self-assessment exists; its content is not verified. AL1 is therefore not used for exchanging TISAX assessment results and does not lead to a TISAX label.

A self-assessment is still useful preparation: you establish your current position and gather evidence. A partner may also request it outside TISAX. It does not replace the required AL2 or AL3 assessment.

AL2: Plausibility check, usually remote

At AL2, an ENX-approved audit provider checks the plausibility of the self-assessment for the locations in scope. This includes evidence and an interview with the responsible person, generally by web conference.

AL2 objectives include Confidential, High availability, Data, Test vehicles and Proto events. The label guide explains them. In the ENX portal, you decide which participants receive your results and at what sharing level. Results are not automatically disclosed to all participants.

An on-site inspection can be agreed for evidence you do not want to send. A full remote assessment, sometimes called “AL2.5”, is another option; it formally remains AL2. Agree the method, evidence access and schedule with the provider.

AL3: On-Site Audit with Highest Assessment Depth

At AL3, implementation is verified comprehensively. The provider reviews documents, interviews people and examines actual conditions. This generally includes an on-site assessment. Scope and objectives determine the evidence and areas examined.

AL3 applies to Strictly confidential, Very high availability, Proto parts, Proto vehicles and Special data. Not every prototype-related objective uses AL3: Test vehicles and Proto events use AL2. Digital development data first needs a confidentiality assessment; it is not automatically a physical prototype.

Request a quotation for your specific scope. Fixed claims such as “AL2 takes two days” or “AL3 costs twice as much” are not procedural rules. Preparation and the number of locations also affect effort.

Comparison Table: AL1 vs. AL2 vs. AL3

CriterionAL1AL2AL3
MethodSelf-assessment without content verificationPlausibility, evidence and interviewComprehensive verification
FormatInternal / outside TISAXUsually remoteGenerally on site
TISAX-LabelNoFor the achieved objectiveFor the achieved objective
Result exchangeNo TISAX resultSharing in ENX portalSharing in ENX portal

Decision Matrix: When AL2, When AL3?

The choice between AL2 and AL3 is primarily determined by the data classification and the specific requirements of your OEM partners . Here is a clear decision guide:

You need AL2 if:

  • Confidential: high confidentiality protection needs.
  • High availability: high availability protection needs.
  • Data: data protection in a processor relationship.
  • Test vehicles or Proto events: the corresponding agreed activity.

You need AL3 if:

  • Strictly confidential: very high confidentiality protection needs.
  • Very high availability: very high availability protection needs.
  • Proto parts or Proto vehicles: protected physical parts or vehicles at your locations.
  • Special data: processing special categories of personal data on behalf of a controller.

Practical Tip: When in Doubt, Ask Your OEM

Confirm required objectives and locations in writing. A later change can require further assessment, but does not automatically double costs. Then plan the budget and process.

Common Misconceptions About Assessment Levels

“AL2 is always enough.” The agreed customer requirement decides. Clarify it before commissioning an assessment; otherwise, a successful result may still miss the evidence your customer requires.

“AL3 is just AL2 with a site visit.” AL3 verifies implementation more comprehensively. Different objectives and protection needs may also change the applicable requirements. Keep assessment method and requirement selection separate.

“Start at AL1 and automatically upgrade.” Your own assessment helps identify gaps. It does not automatically become a TISAX label. The preparation checklist explains the remaining steps.

Not sure which Assessment Level you need?

Our TISAX page shows how to turn agreed requirements into actionable work and suitable evidence. We can discuss the support that fits your starting point.

Sources and reference date

Reviewed on 13 November 2026 using the ENX participant handbook and ISA 6, including the transition to ISA 2027.